At Voltek Electric, we take pride in helping Chicagoland homeowners bring their properties up to modern electrical standards — safely, efficiently, and affordably. In this case study, we’ll walk you through a recent full rewire of a two-flat residential building in Glenview, highlighting our process, timeline, code compliance, and the challenges we overcame.
🏠 The Project Overview
- Location: Glenview, IL
- Property Type: 2-flat residential building
- Scope: Full rewire of both units (kitchens, baths, bedrooms, basement)
- Additional Work: Service panel upgrade, new meter, GFCI and AFCI installation
🔍 Why the Rewire Was Needed
The building was over 60 years old with:
- Unlabeled and outdated fuse panels
- Knob-and-tube and cloth wiring still in use
- Two-prong, ungrounded outlets
- No GFCI protection in bathrooms or kitchen
- Intermittent flickering lights and breaker trips
A city inspection flagged the building during a pre-sale evaluation. The owner called Voltek Electric after reading our article on rewiring signs and requesting a free quote.
⚡ Our Step-by-Step Rewire Process
1. Initial Inspection + Load Calculation
We conducted a full walkthrough, checked current loads, and calculated the required amperage per unit.
2. Permit Pulling + Material Procurement
Voltek handled all Glenview permitting and sourced code-compliant materials including EMT conduit, THHN wire, GFCI outlets, AFCI breakers, and new panels.
3. Strategic Conduit Routing
To minimize drywall damage, we used shared walls, closets, and unfinished basement ceilings to run conduit vertically between floors.
4. New Panel and Meter Installation
We replaced the fuse panel with a 200A main breaker panel, installed a new meter socket, and coordinated with ComEd for shutoff + reactivation.
5. Labeling and Tagging
Every outlet, switch, and circuit was labeled and documented for future homeowners and inspectors.
6. City Inspection and Final Walkthrough
We passed on first inspection, and the home was ready for listing two weeks ahead of schedule.
⏱️ Timeline + Budget
- Estimated Duration: 10 business days
- Actual Duration: 8 business days
- Budgeted Cost: $15,000
- Actual Cost: $13,750
💬 Customer Feedback
“Voltek’s crew was fast, respectful, and clearly knew what they were doing. The inspector even complimented the clean conduit work. Highly recommend!” — J.S., Glenview Property Owner
✅ Project Highlights
- No wall demo needed
- Passed inspection first try
- Saved client $1,250 vs estimate
- Added safety and resale value
Need a Rewire in Glenview or Nearby?
Whether you’re a landlord, homeowner, or buyer — Voltek Electric delivers code-compliant, inspection-ready rewires throughout Glenview and the North Shore.
Call us today for a free consultation and walkthrough.
Leave a Reply